SAPHUE Electric Guitar Wiring Harness Prewired Two Pickup 500K Big Pots 3 Way Toggle Switch for LP Electric Guitarra

Works great, good price

I used these on two very specific application custom builds, expanding the single-pickup Vox SDC-1s into little tone machine with the addition of a neck pickup. I use one of the two guitars with this wiring every day, and I am merciless when it comes to swapping pickups mid-groove. The body of the SDC-1 is routed for two pickups and has a deep channel under the pickguard for this style of switch (it is pretty substantive and goes deep into the well). The installation required a bit of modification to the pickguard, but the sound quality in the two builds (with different pickups) is very nice. Perfect size, well built, gave me a completely different guitar for very little cost ... something that I'm all about.

First of all the V/T/3-way switch works just fine and I feel the quality is good. However, I had to order a second assembly becausd I ruined the first one from poor soldering skill. I was using a 75W soldering gun that was too hot. Solder got inside the volume pot and wrecked it. This was my fault, but the reason for all the soldering was because the wires broke off the pots and switch connections extremely easily. So with the second assembly, I too much gtreater care in handling, plus I switched to a pencil style 40W soldering iron. Even with very careful handling, one wire broke loose from one of the switch connections.

Installed on epiphone les paul special ii.It works great, the length of the cables were great, it made installation effortless. I'd buy it again.Worth noting--the volume for cuts out early when rolling it down.-the tones control is great!-3 way switch very solid, on the stiffer side, needs to be broken in.-on my epiphone I did have to make the holes slightly bigger in the body for the pots to slot through.-the knobs you'll want are the professional bigger scale. I modified mine to rig them on it.

No serious problems. The rhythm / treble switch is clunky as hell, feels like I'm breaking it. The solders are flimsy and the wire gage is microscopic. If you're delicate this will work fine.

I took my time and did it right. Watched some you tube vids and this sounds amazing! I put these on a B.C. Rich Warlock that was completely unplayable for one of my students. My first time ever installing pups and I couldn’t be happier. Great sound! My student is going to be thrilled. Just take your time, watch some you tube vids and this is a really good system for a terrific price.

Honestly unless you're a top tier guitar player that might notice the difference. If you are looking to replace the wiring in your guitar this works perfect. I had an SG from my first band many years ago. And nothing worked, it had been smashed, set on fire, drenched in alcohol drinks, apparently had a hatchet taken to it. It was worthless. But sentimental. It has sat in my attic for 2 decades. I rebuilt the entire thing just to get it to a point it was "technically" playable haha. And anyway this wiring kit, and some cheap pickups from Amazon as well. A few things from Earle Teat shop. And the thing is back to life. I am really glad I found this.

Total replacement on this old thing was a flawless change over solder 3 wires an done